Figure 4- 7: Replacing The Compensation Box Cover - Tektronix P6245 Manual De Instrucciones

To replace the covers, follow these steps:
1. Align the TEKPROBE interface and the strain relief notches with
the tabs on the cover. Refer to Figure 4- - 7.
2. Press the cover catches in so that the cover can be lowered.
3. Slide the tab into the notch.
4. Firmly press the pieces together until the cover catches snap into
place.
Tab

Figure 4- 7: Replacing the Compensation Box Cover

P6245 Instruction Manual
Maintenance
4- 15