Ce Declaration Of Conformity - APRITECH ANTES 24 Guía Para El Instalador

Page 4 ANTES 24
Guide for the installer
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
2. ELECTRICAL SET-UP
3. INSTALLING THE AUTOMATED SYSTEM
3.1. PRELIMINARY CHECKS
3.2. INSTALLING THE OPERATOR
3.3. INSTALLING THE RACK
3.4. POSITIONING THE STROKE-LIMIT MAGNETS
4. ELECTRICAL CONNECTIONS
5. START-UP
6. AUTOMATED SYSTEM TEST
7. MANUAL MODE OPERATION
8. SPECIAL APPLICATIONS
9. MAINTENANCE
10. REPAIRS
Manufacturer: APRITECH ITALIA SRL
Address: Via Mazzini, 121- 66020 - San Giovanni Teatino - Chieti- ITALY
Declares that: Operator mod. ANTES 24
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EEC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will become
a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent modifications.
San Giovanni Teatino 15/03/2012
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol

CE DECLARATION OF CONFORMITY

(DIRECTIVE 2006/42/EC)
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
draws your attention to the notes on the characteristics and operation of the product.
INDEX
Managing Director
Davide Di Renzo
page.5
page.5
page.5
page.5
page.5
page.6
page.6
page.6
page.6
page.6
page.6
page.6
page.6
page.6