Delivery And Preparation For Use - Mobiclinic S220 Sevilla Manual De Instrucciones

PT DE IT FR

3. DELIVERY AND PREPARATION FOR USE

Your wheelchair is usually delivered fully assembled, folded, and with the rear
wheels mounted. A few simple steps are enough to prepare it for use. The rear
wheels of Models S-20 Sevilla and Model S230 Sevilla were unassembled, its
wheels and axles are labeled with a letter R (Right) and L (Left) for a proper
assembly. Please refer step 3.1. to assemble firstly before use.
The content in the packaging carton box is as follows:
1. Folded wheelchair.
2. Disassembled rear wheels (Models S220 Sevilla and S230 Sevilla)
attached to the wheel structure.
3. Accesory box:
Footrest.
Heel strap.
Pre-Adjusted Quick-Release axles identified with
R (Right) and L (Left).
Wrenches (Allen or hexagonal depending on the wheelchair
model)
Instructions for use.
3.1. Install rear wheels by Quick-Release axles. (Figure
1
Pins
Inner Rod
Press and hold the cap of axle, insert the center hole of rear wheel, and then insert
the hole of wheelchair frame. (Figure
Install the left axle and left rear wheel to the left side of the chair and install the
right axle and right rear wheel to the right side of the chair. To determine about the
sides of the wheelchair, unfold the chair and stand behind it, holding the handles:
Right and left side will be your right and left hands subsequently.
4
EN ES
Min. effective critical length
Max. effective critical length
Total length
2
S220 Sevilla | S230 Sevilla
1
)
).
Nut
Cap