EHEIM skimmarine 100 Manual De Instrucciones página 14

English
4. Commissioning
Installing the magnet holder (⌦A)
Attention! Strong magnets! Danger of crushing!
▶ Separate the magnets by twisting them.
▶ Place the magnets at a distance of 30 cm away from each other.
1. Secure the dampening rubbers b into the pertinent bores a with
gentle twisting motions.
2. At all four corners, press the magnet half without logo c onto the
dampening rubbers.
3. Check the grip by moving the magnet.
Installing the lime wood airstone
1. Pull the box d out of the body e (⌦B).
2. Screw the airstone f onto the thread in the box until it stops (⌦C).
‧ The hose and pump are not included in the scope of delivery.
‧ For optimal operation, an airflow of 100 l/h must be guaranteed. We
recommend that you use the EHEIM air pump 100 (art.no. 3701010).
‧ Please note that the actual airflow is reduced when a check valve is
used, and a higher pump performance may be required as a result.
3. Connect your pump's hose to the connecting pieces of the box (⌦D).
Hang the box in your aquarium and check the tightness of the connec-
tion. Ensure that no large air bubbles appear!
4. Place the box at the lower edge and fold it into the body.
Installation in the aquarium (⌦E)
1. With one hand, hold the skimmer at the desired position in the
aquarium from the inside.
2. With the other hand, carefully place the magnet half with logo g onto
the glass panel at a distance from the skimmer (from the outside).
Ensure that the magnet does not strike against the glass panel!
14