Technical Features; Technical Data - Aprimatic ONDA 424 Instrucciones Para La Instalación

3.1 DESTINED USE AND WORKING RANGE
ONDA424 operator is designed to automate the movement of max. 400 Kg sliding gates for residential-use.
Any other use whatsoever is not authorised by Aprimatic S.p.A.
Caution
• It is forbidden to use the product improperly or for different aims than those intended.
• It is forbidden to tamper with or modify the product in any way whatsoever.
• The product must only be installed with APRIMATIC accessories.
3.2

TECHNICAL DATA

Warning
• The maximum weight of the gate is only a partial parameter for determining the limits to use, as gate sliding
MUST also be taken into account.
Technical data
Single-phase power supply
Max absorbed power
Operating temperature
MAX WEIGHT OF GATE
Gearmotor with pinion Z 12
RATED THRUST FORCE
Gearmotor with pinion Z 12
RATED WING SPEED
Gearmotor with pinion Z 12
Degree of protection
Electric motor
3.3 OVERALL DIMENSIONS (FIG.3)
Warning
During the inspection in-situ the installer must ensure
there is space enough all around the gate panel suffi cient
for the overall dimensions indicated in Fig.3.
4.1 SUPPLY INSPECTION
Ensure that the package contains all the components
listed in Fig.4 and check for damage. Before installing
the operator, make sure the model acronym printed on
the packaging corresponds to the one affixed on the
gear motor.
Fig.5
230V 50Hz ± 6%
80W
-25 / +55 ˚C
400 Kg
500 N
10 m/min
IP 44
24 V cc
Aprimatic
S.p.A. MADE IN ITALY
TYPE : ONDA 424
C.I. F
xx V xx W xx A
m/min
xxx N / IPxx
!
00P A00000000xxxxxx
- EN 3 -
Fig.3
73
230
Fig.4
1 2
4 5
Pos. Description
1 Operator
2 Foundation plate
3 Log bolts
4 Release key
5 Actuator anchor nuts + washers
6 Plate with grub screws for limit switch plates

Technical features

170
208
3
6
Q.ty
1
1
4
2
8+4
2+4