Safety Instructions - Precisa 360 EP Manual De Instrucciones

■ 1 Safety Instructions and Conformity
1 Safety Instructions and Conformity
1.1 Conformity
The device has been manufactured and tested in accordance with the standards and directives set out in the
enclosed certificate of conformity.
1.2

Safety Instructions

• When using the device in surroundings with increased safety requirements, the corresponding regulations
must be observed.
• The device may only be operated with the included power adaptor or power cable.
• Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet.
• If the power cable, the power adaptor or its cable is damaged, unplug the device immediately from the
electrical outlet and keep it from inadvertent operation. The device may only be operated with a power ad-
aptor or a power cable in perfect conditions.
• If there is any reason to believe that it is no longer possible to operate the device without danger, it must
be immediately unplugged from the electrical outlet and kept from inadvertent operation.
• In carrying out maintenance work, it is essential to heed the instructions in the chapter "Maintenance and
servicing" of the operating instructions.
• Do not operate the device in an area subject to explosion risks or caustic atmospheres.
• Take care when handling with liquids, that no liquid is split into the inside of the balance, on connections
of the device, on the power cable or the power adaptor. Should this although happen, unplug the device
immediately from the elctrical outlet and keep it from inadvertent operation. The device may only be ope-
rated again after a re-check made by a Precisa service technician.
• The device may only be used for weighing of solid materials, of liquids filled into secure containers, and
for running applications designed especially for the device (e.g. animal weighing or density determinati-
ons).
• Do not exceed the maximum permissible load of the balance.
• When using the device in combination with other appliances made by Precisa as well as with appliances
produced by other manufacturers, the current regulations for the safe use of the relevant attachments and
their application in accordance with instructions must always be observed.
Before connecting the device to the mains, be sure that the operating voltage stated on the device and
on the power adaptor or power cable agrees with the local mains voltage. If it doesn't, the equipment
must not be connected to the mains at all! In this case contact the Precisa Customer Service.
If any damage or injury occurs, liability and responsibility rest with the user.
1
DANGER
NOTE