Publicidad
Using Minimonitor
To start a Minimonitor function, follow the steps as below.
1.
In the Checkme Main Screen, select <Minimonitor>
2.
Correctly connect the "Minimonitor adaptor", SpO
device.
3.
Put finger into the external SpO
below.
4.
Turn on the Bluetooth on your pad and open "Check Trace "app. The app will
search the device through Bluetooth.
5.
Choose the device you're monitoring via SN.
6.
When the devices are connected successfully, you can see the waveform and
measurement data on both Checkme and app. Please see below the displaying
screen on app.
7.
When you finish measuring, press the Home button to stop monitoring.
2.9 ECG Holter (optional)
2.9.1
Choose Holter Lead
Choose the proper ECG lead in the setting menu.
There are 4 options: LEAD II; CC5; CM5; User defined.
2.9.2
Meaurement
1.
In the Main sceen, tap the ECG Holter icon.
2.
Choose the right user, enter the guidance screen.
3.
Plug ECG cable and place eletrodes on the right postions as guided.
4.
The display will show ECG waveform, press the button
recording will start to record 1 minutes later automatically without pressing the
2
sensor. Place the ECG electrodes as shown
2
15
cable and ECG cable with the
to start recording. (The
Publicidad
Capítulos
