Publicidad
button)
5.
Wear the Holter Belt around your waist
6.
Put Checkme in the pocket of the Belt, then close the pocket.
Keep recording for 24 hours or less. During this process, the device will beep if the
cable or any electrode is off.
2.9.3
Report on PC
Checkme Holter Browser is a PC software to check and print the report.
1.
Connect device and PC by USB cable.
2.
Operation on device:
Settings->To PC; or Review-> Holter icon->To PC icon
3.
Operation on PC:
Open the software, press the button in the leftup corner to download the data
from device. Then you can check the report.
2.10 Pedometer
To start a Pedometer measurement,
1.
In the Main Screen, select <Pedometer> icon. If you have not created user, then
please add your user account.
2.
Select a user to enter the screen as below.
3.
Tap the
4.
Tap the
button to start calculating steps.
5.
Place the device into your pocket.
6.
When you finished calculating steps, press the Home button to stop the
pedometer.
button to set your target, if needed.
16
Publicidad
Capítulos
