Maintenance; Warranty - SPARKY EX 150E Instrucciones De Uso

DUST EXTRACTION
The efficiency and durability of sandpaper are much im-
proved by dust extraction through the apertures in the
disc and sandpaper. The dust collector bag (8) must be
emptied regularly.
EXTERNAL DUST EXTRACTION
The dust extraction adapter (9) with inner diameter Ø35
mm ensures coupling to a vacuum cleaner in case of in-
creased dust generation. Dismount the collector bag (8)
and fasten the machine to a vacuum cleaner.
ACCESSORIESTOBE USED WITH THIS
POWER TOOL
EX 150E
Sandpaper Ø150 mm (P80, P120, P180) - 3 pcs., adapter
- 1 pc., dust bag - 1 pc.
EX 150CE
Sandpaper Ø150 mm (P60, P80, P120, P180, P240) - 5
pcs., adapter - 1 pc., dust bag - 1 pc.

Maintenance

WARNING: Always ensure that the tool is
switched off and unplugged before attempting to per-
form inspection or maintenance.
BRUSH REPLACEMENT
When the carbon brushes are worn out both brushes
must be replaced simultaneously with genuine brushes
at SPARKY service centre for warranty and post-war-
ranty service.
GENERAL INSPECTION
Regularly inspect all fasteners and ensure they are prop-
erly tightened. Should any of the screws be loose, re-
tighten it immediately to avoid hazards.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in order
to avoid a safety hazard.
CLEANING
For safe operation always keep the machine and its ven-
tilation slots clean.
Regularly check to see if any dust or foreign matter has
entered the ventilation slots and the grills around the
switches. Use a soft brush and/or air jet to remove any
accumulated dust. Wear safety glasses to protect your
eyes whilst cleaning.
Exterior plastic parts may be cleaned with a damp cloth
and mild detergent if necessary.
Original instructions
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
WARNING: Water must never come into con-
tact with the tool.
IMPORTANT! To assure product safety and reliability,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed by
certified service centres or other qualified service organ-
isations, always using genuine replacement parts.

Warranty

The guarantee period for SPARKY power tools is deter-
mined in the guarantee card.
Faults due to normal wear, overloading or improper han-
dling will be excluded from the guarantee.
Faults due to defective materials implemented as well as
defects in workmanship will be corrected free of charge
through replacement or repair.
The complaints for defective SPARKY power tools will
be recognized if the machine is sent back to the dealer
or is presented to the authorised warranty service centre
undismantled, in its initial condition.
Notes
Carefully read the entire original instructions before us-
ing this product.
The manufacturer reserves the right to make changes
and improvements to the products and to alter specifica-
tions without prior notice.
Specifications may differ from country to country.
7
EN