KPS DT10 Manual De Funcionamiento página 7

ector KPS-DT10 • Voltage detector
5. DETECCIÓN DE VOLTAJE CA
Risk of Electrocution. Before using to check
pry-
for voltage in an outlet, always test the Volt-
rew-
age Detector on a known live circuit to verify
that the Voltage Detector is working properly.
y).
perly,
Risk of Electrocution. Keep hands and fingers
good
on the body of the probe and away from the
probe tip.
To check AC electrical voltage in an outlet:
the 1. Touch the probe tip to a cord plugged into the
outlet, or insert it into the outlet hole.
and
2. If AC electrical voltage is present, the detector
light will flash and the audible warning will sound.
the
s,
d
WARNING
WARNING
7