Danger Due To Damage To Equipment; Before Using The Device; Delivery Status; Technical Data - Gloria FoamMaster FM 30 Instrucciones De Uso

RZ_FM 30_1018.qxp_Text_GB 30.10.18 14:25 Seite 19
WARNING
device and the foaming agents. Therefore always comply with the safety information / safety
measures of the foaming agent manufacturer and the following safety instructions:
Do not blow out blocked nozzles using the mouth.
Do not point the end of the spraying lance at yourself when unscrewing it.
Changes or improvements to the device are not permitted without the agreement of the manu-
facturer! Never bypass, modify or remove the safety equipment.
WARNING
skin contact with cleaning fluids may impair your health to some extent. Consult a doctor if
you develop symptoms or are unsure. You should therefore observe the following safety instruc-
tions:
Note safety instructions on the labels of the spraying pesticides used. Pay attention to the stated
max. concentration. Certain liquids require the use of protective glasses, gloves or other safety
measures.
Always request a safety data sheet according to 1907/2006/EC from the foaming agent
manufacturer. This states the recommended protective equipment and measures for each agent.
2.3 Danger due to damage to equipment >>
damage to the device! For this reason, observe the following safety instructions:
3

Before using the device

3.1 Delivery status >>
A Pump handle
B Spray tube holder 1
C Spray tube holder 2
D Fill level control
E Pump body
F Base ring
G All-plastic quick closure valve
H Plastic spray pipe with nozzle
Any accessory parts are packaged separately as part of the delivery.
4

Technical data

Type:
Article number:
Max. filling volume:
Total capacity approx.:
Empty weight approx.:
Max. operating overpressure: 3 bar
You may be exposed to hazards that could injure you when handling the
Contact with cleaning fluids poses a health risk! Inhaling, swallowing or
The device must not be pressurised for extended periods.
Do not store foaming agent in the device.
The device is shipped as standard as follows
FM30
000658.0000
3,0 l
5,0 l
1,5 kg
ATTENTION
Improper use can cause
I Foam cartridges (G1 - G3)
J Adjustable carrying straps
K Safety / pressure relief valve
L Filling funnel
M Suction nipple
N 1 x user manual and product information
(not shown)
Max. operating temperature: + 40 °C
Tank material:
Pump material:
Maximum delivery rate:
O-ringe material:
Flat spray nozzle:
19
(see figure on page 2):
Polyethylene
Polyethylene
290 ml/min
FKM (fluoroelastomer)
110 °