Testing Of The Unit; Note On Disposal; Important Information On Product Liability; Eu Declaration Of Conformity - Titan Focus 500 Manual De Instrucciones

GB
TESTING OF THE UNIT / INFORMATION ON PRODUCT LIABILITY / GUARANTEE DECLARATION

TESTING OF THE UNIT

For safety reasons, we would recommend having the device
checked by an expert as required but at least every 12 months
to ensure that it can continue to operate safely.
In the case of unused devices, the check can be postponed
until they are next started up.
All (potentially deviating) national inspection and mainte-
nance regulations must also be observed.
If you have any questions, please contact the customer service
team at Titan.

NOTE ON DISPOSAL

In observance of the European Directive 2002/96/EC on waste
electrical and electronic equipment and implementation in
accordance with national law, this product is not to be dis-
posed of together with household waste material but must be
recycled in an environmentally friendly way!
Titan or one of our dealers will take back your used Titan waste
electrical or electronic equipment and will dispose of it for you
in an environmentally friendly way. Please ask your local Titan
service centre or dealer for details or contact us direct.

IMPORTANT INFORMATION ON PRODUCT LIABILITY

According to an EU directive, the manufacturer is only liable
without limitation for faults in the product if all parts come
from the manufacturer or have been approved by the manu-
facturer and have been mounted to the device and are operat-
ed properly. If third-party accessories or spare parts are used,
the manufacturer is exonerated wholly or partly from his/her
liability if use of the third-party accessories or spare parts have
caused a defect in the product. In extreme cases, the relevant
authorities can completely prohibit using the entire device.
With original Titan accessories and spare parts, compliance
with all safety regulations is guaranteed

EU Declaration of conformity

We declare under sole responsibility that this product
conforms to the following relevant stipulations:
2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU
Applied harmonised norms:
EN 60745-1, EN 50580, EN 62233, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
The EU declaration of conformity is enclosed with the
product.
If required, it can be re-ordered using order number
2389927.
24

GUARANTEE DECLARATION

Titan Tool, Inc., ("Titan") warrants that at the time of delivery
to the original purchaser for use ("End User"), the equipment
covered by this warranty is free from defects in material and
workmanship. With the exception of any special, limited, or
extended warranty published by Titan, Titan's obligation un-
der this warranty is limited to replacing or repairing without
charge those parts which, to Titan's reasonable satisfaction,
are shown to be defective within thirty-six (36) months after
sale to the End User. This warranty applies only when the
unit is installed and operated in accordance with the recom-
mendations and instructions of Titan.
This warranty does not apply in the case of damage or wear
caused by abrasion, corrosion or misuse, negligence, ac-
cident, faulty installation, substitution of non-Titan compo-
nent parts, or tampering with the unit in a manner to impair
normal operation.
Defective parts are to be returned to an authorized Titan
sales/service outlet. All transportation charges, including re-
turn to the factory, if necessary, are to be borne and prepaid
by the End User. Repaired or replaced equipment will be
returned to the End User transportation prepaid.
THERE IS NO OTHER EXPRESS WARRANTY. TITAN HEREBY
DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING,
BUT NOT LIMITED TO, THOSE OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, TO THE EXTENT PERMIT-
TED BY LAW. THE DURATION OF ANY IMPLIED WARRANTIES
WHICH CANNOT BE DISCLAIMED IS LIMITED TO THE TIME
PERIOD SPECIFIED IN THE EXPRESS WARRANTY. IN NO CASE
SHALL TITAN LIABILITY EXCEED THE AMOUNT OF THE PUR-
CHASE PRICE. LIABILITY FOR CONSEQUENTIAL, INCIDENTAL
OR SPECIAL DAMAGES UNDER ANY AND ALL WARRANTIES IS
EXCLUDED TO THE EXTENT PERMITTED BY LAW.
TITAN MAKES NO WARRANTY AND DISCLAIMS ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO ACCESSORIES,
EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY TITAN. THOSE ITEMS SOLD, BUT NOT
MANUFACTURED BY TITAN (SUCH AS GAS ENGINES, SWITCH-
ES, HOSES, ETC.) ARE SUBJECT TO THE WARRANTY, IF ANY, OF
THEIR MANUFACTURER. TITAN WILL PROVIDE THE PURCHAS-
ER WITH REASONABLE ASSISTANCE IN MAKING ANY CLAIM
FOR BREACH OF THESE WARRANTIES.
Focus 500
Subject to modifications