Identification And After-Sales Service; Identification And Servicing - Grillo DUMPER 406 Manual De Instrucciones

FURTHER SAFETY ADVICE
1) Pulleys rotation is extremely dangerous.
2) Never reverse with the engine at high throttle.
3) Never operate the levers too quickly with the engine at full throttle.
4) Always switch off the engine before filling up with fuel, keep away from sparks or flames
and do not smoke!
5) Avoid fuel spills and after filling the tank clean all spills before starting the engine.
INTENDED USE OF THE MACHINE
Always comply with the operating, maintenance and repair conditions specified by the constructor.
Use only original accessories and spares which assure maintenance of the machine's safety

IDENTIFICATION AND AFTER-SALES SERVICE

IDENTIFICATION
The crawler truck is provided with an ID plate showing the machine's serial number, located on the
chassis under the body.
SERVICING
This handbook provides the instructions for using the crawler truck. For a correct basic
maintenance contact your Local Dealer.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and
interchangeability.
Each order should include the machine serial number and the code of the spare part needed.
For engine spares, refer to the information in the specific manual.
WARRANTY
The warranty is subject to the terms and conditions stated on the card.
As regards the engine, the individual manufacturers' conditions apply.
RECOMMENDED SPARE PARTS TO BE KEPT ON HAND
1 set of belts
1 clutch cable
HOW TO ORDER SPARE PARTS
Always state the machine's serial number and the code of the spare part needed. Contact our
authorised service centres or the factory direct. Our address is:
GRILLO S.p.A.
Via Cervese 1701 – 47521 CESENA (FC) ITALY
Tel. 0039 – 0547 – 633111 / Fax 0039 – 0547 – 632.011
Web site: www.grillospa.it / e-mail: grillo@grillospa.it
Dumper 406/Translation of the original instructions