Publicidad
Idiomas disponibles
Idiomas disponibles
(3) NEUTRAL GEAR ENGAGED INDICATOR
The indicator light serves to show that the travel lever is in neutral.
(4) MOTOR HOURS COUNTER
The motor hours counter implicitly displays the total number of
motor hours. By pressing the Mode button you gradually switch
between the following maintenance functions:
TMR 1
- individual trip counter. The value is reset by
holding down the Mode button for 6 seconds.
OIL CHG
- oil change. The function has two oil change
intervals. The first is after 5 hours (oil change
after the engine has run itself in) and is
shown only once. The second is after 25 hours
(standard oil change).
AIRFILTER SVC - cleaning or changing the air filter. The interval
is set to 50 hours.
Two hours before the set interval has elapsed the display will
show a message lasting 10 seconds.
After the interval has elapsed the display will show the message
NOW.
Any of the above mentioned alarms can be reset by holding down
the Mode button for 6 seconds.
Tampering with the counter will void the warranty – the motor hours connection is equipped
with a tamper seal.
Immediately contact your service centre if the motor hours counter malfunctions.
(5) MOWING DECK ACTIVATION SWITCH
Pressing the part with the symbol engages the mowing deck. Pressing the part without the symbol
disengages the mowing deck.
Not lit – the travel lever is in position F (forward) or R (reverse)
Lit green – the travel lever is in position N (neutral)
Deactivation of the mowing deck / the mowing deck is
DEACTIVATED
deactivated.
ACTIVATED
Activation of the mowing deck
23
Publicidad
