•
If a leak is found, close the gas container (follow the user instructions for the regulator).
•
Tighten the fitting and the metal rings of the connection;
•
Open the gas container (follow the user instructions for the regulator) and repeat the
procedure again.
If there is still a gas leak contact a professional and qualified engineer for help.
ELECTRIC HEATING
The electric heating system is designed for infrared radiation technology. Even if used
in an unsealed large room the efficiency will be perfect. There is a switch to select Gas
or Electric heating. The heater has two heating elements, which can be used separately
or together depending on the need.
Operation:
a.
Make sure that the plug is normally earthed. Put the plug into the socket.
b.
Press switch "Fan" to get ready to use the heater and to start the fan.
c.
Press switch "I" to start electric heating with half effect.
d.
Press the other switch "I" to start electric heating with maximum effect if needed.
e.
Turn OFF all switches after use. Remove the plug from the socket.
b
c
* turn thermostat to "High": electric heater will work to high room temperature
* turn thermostat to "Low": electric heater will switch off at lowest room
temperature and will restart automatically when this lowest room temperature is
undercut
SAFETY TIPS
•
Always place the heater facing the center of the room.
•
Do never move the heater when it is burning.
•
Prevent people, especially young children and elderly people from touching very
hot surfaces.
•
Never dry clothes at the top of the metal guard grill
•
Keep all flammable materials at least one meter away from the heater.
•
Never use a gas heater in a bathroom, bedroom. mobile home, high rise buildings
d
4
75