Miscellaneous; Cleaning And Maintenance - Medisana IRL Instrucciones De Manejo

GB
3 Operating / 4 Miscellaneous

4 Miscellaneous

4.1
Cleaning and
maintenance
14
IMPORTANT NOTES
Do not exceed a radiation time of 15 minutes and 2 sessions
a day.
The infrared radiation emitted by the device is not suitable for
tanning.
• Before cleaning the device and replacing the bulb, unplug it from the
mains and allow it to cool.
• After cooling clean parts,
them dry.
• Do not use aggressive cleaning and scouring materials.
• Never immerse the device in water.
• Please ensure that water does not penetrate the inside of the device. If
this is the case, do not use the device again until it is completely dry.
• Always replace the bulb of the infrared lamp with the same bulb type.
• Store the device in a dry, cool place.
Infrared light bulb
Bulbs of a higher power than indicated on the rating plate must not be used.
The following replacements for the light bulb have to be used:
GE PAR38 IR 150 W or Philips Infrared PAR38E 150 W
If the glass of the light bulb is broken, immediately disconnect the device.
Attention! Danger of injury due to splinters of glass! Let the device cool
down. Carefully remove the part of the light bulb which is screwed in the
socket with a pair of pliers (protect your eyes) or have the device repaired by
a service agent.
The light bulb is not part of the guarantee, it won`t be replaced free of
charge.
and with a damp cloth and then rub