THERM PRO TP-60S Manual De Instrucciones página 17

Press and hold the CHANNEL/SYNC button on the
base station and then press TX button on the
transmitter.
EN
Relocate the base station and/or the remote unit until
connection is found.
Signals from other electronic devices may cause
interference. Place the base station and receiver
away from these devices.
The transmitter may not function properly in extreme
temperatures due to battery power. Replace the
batteries or the unit will resume proper function in
more moderate weather.
If the base station is attached to a refrigerator or a
metal object by magnet, the transmission may be
shorter. Remove the base station from the refrigera-
tor or the metal object or place the base station and
remote sensor as close as possible.
-32-
If the Humidity is lower than 10%, it will display LLL.
Warnings
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
Do not immerse the unit in water.
Do not remove any screws.
Do not dispose this unit in a fire. IT MAY EXPLODE.
Keep unit away from small children. The unit or parts
of the unit might be a choking hazard.
Never attempt to recharge the batteries using any
other methods.
Dispose of the unit legally and recycle when possible.
Components
1. One base station unit (Receiver).
2. One remote sensor (Transmitter).
-33-
EN