Operation
Machines with PROGRAMMER:
Once the switch has been switched on, push one of the red buttons situated on the front of
the machines. The buttons refer to 1, 2, or 3 oranges, while the button on the right refers
to continuing squeezing.
Machines with JUICE LEVEL DETECTOR:
Once the switch of the machine is turned on, turn the detector switch to the position AUT.
In manual mode the switch can be used.
Machines with AUTOMATIC SHOWER:
Once the water tube has been connected to the connection at the back of the machine, push the green button.
The machine has to work in able to connect the shower.
TO STOP THE SQUEEZING PROCESS
Stop the machine by pressing the 0 red button at the on/off switch.
Machines with SELF SERVICE TAP:
Close the tap and turn the red light switch off (STOP) as indicated on the sticker on the cover screen.
Machines with PROGRAMMER:
The first 3 options stop automatically. To stop the continuing mode, push again this button and put the switch
(Pos.0).
Machines with JUICE LEVEL DETECTOR:
In "AUT", the machine stops automatically, once the dispenser is full. If the machine operates in "MAN",
disconnect the on switch.
Machines with AUTOMATIC SHOWER:
Push the SHOWER button and close the water connection.
AUT = Automatic
MAN = Manual
10