TFA Dostmann MAXIM II Manual De Instrucciones página 33

1. Press the SET key after completing the contrast setting in order to
enter the Time Zone setting (flashing).
2. Using the IN key, set the time zone. The range runs from -/+ 12 and
then runs from -12 back to +12 in consecutive 1-hour intervals.
Press the SET again to confirm and to enter the "Time reception
3.
ON/OFF setting" or exit the setting mode by pressing the
CHANNEL key.
TIME RECEPTION ON/OFF SETTING
In area where reception of the DCF-77 time is not possible, the DCF-77
time reception function can be turned OFF. The clock will then work as a
normal Quartz clock. (Default setting is ON).
Flashing
The digit "ON" will start flashing on the LCD.
1.
2. Use the IN key to turn OFF the time reception function.
Confirm with the SET key and enter the "12/24-Hour display
3.
setting" or exit the setting mode by pressing the CHANNEL key
Note:
If the time reception function is turned OFF manually, the clock will not
attempt any reception of the DCF time as long as the Time Reception
OFF function is activated. The Time Reception icon will not be displayed
on the LCD.
12/24 HOUR TIME DISPLAY SETTING
After setting time reception ON/OFF, press the SET key, "12h" or
1.
"24h" flashes in the LCD.
Press the IN key to select the "12h" or "24h" display mode.
2.
Press the SET again to confirm and to enter the "Manual time
3.
setting" or exit the setting mode by pressing the CHANNEL key
Flashing
32