Manual Time Setting - TFA Dostmann MAXIM II Manual De Instrucciones

Note:
When 24h mode display is selected, the calendar format will be date and
month display.
When 12h mode display is selected, the calendar format will be month
and date display.

MANUAL TIME SETTING:

In case the thermo-hygro-station is unable to detect the DCF-signal
(disturbances, transmitting distance, etc.), the time can be manually set.
The clock will then work like a normal Quartz clock.
Hours
(flashing)
1. Press the SET key until the time display flashes.
2. Use the IN key to set the hours and the OUT key to set the minutes.
Pressing these keys continuously moves the hours consecutively by
1 and the minutes consecutively by 5.
Press the SET again to confirm and to enter the "Calendar
3.
setting" or exit the setting mode by pressing the CHANNEL key.
Note:
The unit will still try to receive the signal every despite it being manually
set. When it does receive the signal, it will change the manually set time
into the received time. During reception attempts the DCF tower icon will
flash. If reception has been unsuccessful, then the DCF tower icon will
not appear but reception will still be attempted the following day.
CALENDAR SETTING:
Year (flashing)
The date default of the thermo-hygro-station is 1. 1 in the year 2006.
Once the radio-controlled time signals are received, the date is
automatically updated. However. if the signals are not received, you can
adjust the date manually. To do this:
Date (flashing) Month (flashing)
33
Minutes (flashing)