Accessing The Setting Mode; Checking The Settings; Changing The General Password; Long Distance Call Block - Intelbras ITC 4000 Manual Del Usuario

Accessing the setting mode

Remove the phone from its base and press: * + * + * + 9 + 9 + * + password + #.
Where:
Password: 6 digits password.
Example: ***99*222222#
Standard password: 222222.

Checking the settings

Use this function to check the status of the desired setting.
Remove the phone from its base and press: * + * + * + 9 + 9 + * + password
+ # + function + #
Example: ***99*222222#0502#.
The status of the function Long distance call lock will be displayed (ENABLE
or DISABLE).

Changing the general password

To change the ITC 4000's password, use the following setting:
On the setting mode, press: 0 + 2 + 1 + 1 + * + new password + * + new
password+ #.
Where:
New password: 6 digits password.
Example: ***99*222222#0211*111111*111111#.
Your new password is 111111.

Long distance call block

To block long distance calls (initiated with a 0) made through the ITC 4000:
On the setting mode, press: 0 + 5 + 0 + 2 + * + HAB + #.
Where:
HAB:
0: enables long distance calls
1: blocks long distance calls.
Example: ***99*222222#0502*0#.
Long distance calls are now enabled at the ITC 4000.
Standard setting: long distance calls are enabled.
84