Remote Control; The Cr108 Remote Control; Amplifier Commands - Arcam A19 Manual Del Usuario

remote
control
The CR108 remote
control
The CR108 is pre-programmed for use with the A19.
Make sure you have fitted the two AAA batteries
supplied before attempting to use the remote control.
1. With the CR108 remote face-down, press down
on the non-slip indentations of the battery
compartment cover and slide the cover off.
2. Insert the two ' A AA' batteries supplied. Take
care to insert the batteries in the right direction
by following the '+' and '–' marks in the battery
compartment.
3. Slide the battery compartment cover back and lock
it in place with a click.
The CR108 requires a clear line of sight to the front
panel display of A19 to ensure reliable operation.
+
-
DISP BAL
BD AUX
PVR AV CD
TUN PHONO SAT
CR108
E-8

Amplifier commands

This toggles a powered-on A19 amplifier
2
between 'standby' and 'on' modes.
Toggles the mute function to silence
-
speaker output. The source is displayed on
screen followed by Mt (mute), when active.
Decrease ( ) and increase ( )
VOL –
VOL– VOL+
amplifer volume
VOL +
Source Selects the amplifier input:
keys
Blu-ray Disc or DVD input
BD
Personal Video Recorder input
PVR
DAB/FM/AM tuner input
TUN
AV (television sound) input
AV
Phono input
PHONO
Auxiliary line input
AUX
CD input
CD
Satellite decoder input
SAT
Adjust balance levels (using and
BAL
– +
controls) between L9 (left), through 0, to
R9 (right)
Cycles through display panel brightness
DISP
options (bright, off, dim)