A19 Connections; Aux Input - Arcam A19 Manual Del Usuario

A19
connections
Power inlet
Connect the correct
mains cable here.
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
POWER INLET
SUPPLY
VOLTAGE
~ 50-60 Hz
110-120V/220-240V
350W MAX
Voltage select
Ensure that the voltage selected
matches your local power supply.
Accessory Power
3.5mm mono jack socket for
accessory power cable (supplied).
The cable provides two 2.1mm DC
jacks to power rLink and/or rBlink
accessories.
Phono earth terminal
For connecting your turntable
earth lead, if required.
Note that this terminal must
not be used as a safety earth.
AV PVR BD SAT TUNER CD
ACCESSORY
POWER
OUTPUT: 6V DC 1A
Audio inputs
The labels above the connectors give
suggested audio inputs, although any
suitable device may be connected to the
line-level inputs. (Note, however, that the
name of the input shown on the front-
panel display cannot be changed.)
and are all line-
AV, PVR, BD, SAT, TUNER CD
level inputs.
The input has different
PHONO (MM)
characteristics. See page 7 for more
information and page 12 for the phono
input specification.
Speaker terminals
See page 9 for information on
connecting loudspeakers.
PHONO RECORD PRE
(MM) OUT OUT
PHONO
GROUND
ONLY
4–16 OHMS. CLASS 2 WIRING
Pre-amplifier output
provides the pre-amp output for
PRE OUT
use in a bi-amplified system (for example,
with a P38 power amplifier).
See page 9 for more information.
Record output
is a line level output for use in
RECORD OUT
recording from other sources.
See page 7 for more information.
E-6

Aux input

Analogue 3.5mm stereo jack socket,
intended for connecting a portable
MP3 player.
A19 INTEGRATED AMPLIFIER
AUX PHONES POWER
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones.
See page 10 for more
information.
Note
Please read the 'Placing the unit' , 'Power' and
'Interconnect cables' sections on page 5 before
connecting up your A19 integrated amplifier!