Mx Onda MX-GR2165 Manual De Instrucciones página 44

When in operation, a fire may occur if the sandwich maker comes into
contact or is near flammable material or items such as curtains, net
curtains, etc.
The use of accessories not recommended by the appliance manufacturer
may cause fire, electric shock or bodily injury.
Disconnect the sandwich maker, whenever you are not using it or when
there is a power failure, or "jump" a fuse or automatic and before
proceeding with the maintenance cleaning itself.
Do not place the sandwich maker on or near gas burners, hot plates, or hot
ovens.
In case of failure, anomalies, if the sandwich maker has fallen, the plug or
other parts have deteriorated, or the cable is damaged, do not plug in the
appliance and do not try to repair it on your own. Contact the nearest MX
ONDA Official Technical Service.
BEFORE USING THE SANDWICH MAKER FOR THE FIRST TIME
Place the sandwich maker on a firm, dry and level surface.
Open the top cover using the clip 3.
Place any of the plates (7, 8 or 9) correctly in their position. To do this
insert the tabs of the plate into the holes of the sandwich maker and then
press the plate until you hear a "click", indicating that it is perfectly fitted.
Repeat this operation with the other plate.
Close the upper cover, fixing it to the lower cover by means of the closing
clip 3.
Plug the plug of the mains cable of the sandwich maker into the mains and
the power indicator 1 as well as the temperature indicator 2 will light up,
wait a few minutes until the temperature indicator 2 goes out.
Unplug the sandwich maker and wait for it to cool completely.
Open the closing clip 3, lift the upper cover and remove the plates using
buttons 5 and 6.
Wash all three sets of plates with hot water, some dishwashing liquid and a
sponge. Do not use metal scouring pads or abrasive liquid cleaners and
DO NOT insert the plates in the dishwasher, then dry them with a cloth.
Clean all surfaces with a slightly damp cloth, DO NOT use metal scouring
pads or abrasive liquid cleaners. Thoroughly dry all surfaces.
Note:
The first few times you use the appliance it is possible that it gives off some
smoke or a slight odor, this is caused by the lubrication of the different
internal elements. It is normal and does not mean a malfunction.
4