CONTROLS AND ELEMENTS
2
1
3
4
1. Power indicator
2. Temperature indicator
3. Closing clip
4. Handle
5. Top plate extraction button
6. Bottom plate extraction button
7. Grill plates
8. Plates for sandwiches
9. Waffle plates
USE AS A SANDWICH MAKER
To use this appliance as a sandwich maker, proceed as follows:
1. Check that the appliance is disconnected from the mains and that both the
sandwich maker and the plates are completely cold.
2. Insert the sandwiches plates 8 correctly, as indicated in the previous
section.
3. Lightly spread the two plates with a little butter or margarine. This will
prevent the sandwiches from sticking to the plates.
4. Close the upper cover, fixing it to the lower cover by means of the closing
clip 3.
5. Plug the plug of the network cable of the sandwich maker into the mains,
the power indicator 1 will light up. The appliance will begin to heat up.
5
5
9
6
8
7