STAINLESS STEEL JUICE STEAMER FOR
INDUCTION HOB
Main components
Glass lid
Berry section with holes 4 l
Juice section
Pan 2.5 l
Tap hose with clip
Use
Fill the pan with water and place it on the
hotplate.
Place the juice section on top and check
that the tap hose is fi tted to the pipe and
that the clip is fi tted.
Place the berry section on top of the juice
section and fi ll it with clean berries or fruit.
Place the lid on the pan.
Adjust the temperature of the hotplate so
that the water heats gently throughout the
process. Make sure there is always water in
the pan.
Once the water has been boiling for around
half an hour, approximately one litre of
juice can be drained into a jug. This can
then be poured back into the berry section.
Distribute the sugar evenly over the berries.
The warm juice softens the berries and
dissolves the sugar.
Drain off the juice and pour it into clean,
sterilised bottles.
Always clean the juice steamer after
use. Hard water may cause a build-up of
limescale in the pan. For that reason, always
wipe the pan with half a lemon or boil a
vinegar solution in the pan (10 ml ordinary
vinegar per 1 litre water).
Wipe the pan down.
6
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacements parts
•
Returns
•
Guarantee issues
•
www.schou.com
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
© 2019 Schou Company A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.