♦ Select "LADJ" by pressing [UP] button.
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
- Test function of each channel
With this function you can test each channel on its (correct) function.
♦ Select "tESt" by pressing [UP] button.
♦ Press [ENTER], the display shows"T-XX", "X" stands for the channel number.
♦ The current channel will be tested.
♦ Select the desired channel by pressing [UP] button.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Main menu 4
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
♦ Press [UP] to select "TIME".
- Fixture running time
With this function you can display the running time of the device.
♦ Select "MATI" by pressing [UP] button.
♦ Press [ENTER], the display shows"XXXX", "X" stands for the number of hours.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Lamp running time
With this function you can display the running time of the lamp.
♦ Select "LATI" by pressing [UP] button.
♦ Press [ENTER], the display shows"XXXX", "X" stands for the number of hours.
♦ Press [ENTER] or [EXIT/DN] to exit.
- Clear lamp time
♦ With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
♦ Select "CLLT" by pressing [UP] button.
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
- Main menu 5
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
♦ Press [UP] to select "EDIT".
- Define the number of steps in Run
With this function you can define the number of steps in the Program Run.
♦ Select "STEP" by pressing [UP] button.
43/91
51838700X18NXS_V_1_3.DOC