Sylvania NB500SL1 Manual Del Propietário página 13

2
Connect the cables by following the descriptions below.
HDMI Video / Audio Connection
A
Note
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When using HDCP-incompatible TV, the image will not be viewed properly.
Not displayed the picture on the TV screen ...
The indicators blink under the following conditions.
• When the connected device does not support HDCP.
• When the connected device is recognized as an HDCP incompatible by HDMI SRM.
• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for some reason.
The indicators blink as follows for 30 seconds.
DISC IN
Component Video + Standard Audio Connection
B
Standard Video + Standard Audio Connection
C
EN
CONNECTIONS
HDMI cable
STOP PLAY POWER
Y P /C
R R
L
P /C
B B
R
AUDIO COMPONENT
OUT VIDEO OUT
RCA audio cable
L
RCA video cable
R
AUDIO VIDEO
OUT OUT RCA audio cable
Your TV
HDMI IN
RCA
COMPONENT
component
VIDEO IN
Y
video cable
PR/CR
PB/CB
VIDEO IN
Your TV
L
AUDIO IN
R
Your TV
L
AUDIO IN
R
11