HDMI CEC
HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard.
This function may not work properly depending on a device to be connected.
When "HDMI CEC" setting is set to "On", functions listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected
automatically. The appropriate external input channel can also be selected on your TV automatically when you press
[PLAY B], [SKIP H], [SKIP G], [Number buttons], [DISPLAY], [TOP MENU], or [POP MENU / MENU] when the unit's
power is on.
Standby
When you press and hold [POWER Q] for 2 seconds, it turns off the power of the TV first and then turns off the power of
this unit also.
When the connected HDMI CEC compatible display device is turned off, this unit may also turn off together.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu
language (OSD menu language) for this unit.
• This feature is available only when "Auto(XXXX)" is selected in "Player Menu" in the setup menu. (Refer to "Player Menu"
on page 32.)
Current Version
You can confirm the current software version.
1
Use [K / L] to select
2
Use [K / L] to select "Software Update", then press [ENTER].
3
Use [K / L] to select "Current Version", then press [ENTER].
Others
Current Version
Current Version
If you wish to check latest update
or other product information,
please check our Website.
http://www.sylvaniaconsumerelectronics.com
4
Press [ENTER] or [RETURN] to exit.
Note
• Please visit http://www.sylvaniaconsumerelectronics.com to download the latest firmware version.
42
FUNCTION SETUP
, then press [ENTER].
x.xxx
EN