Menu
Channel Level
Test Tone:
Tests or sets the
"Test Tone" is the test
volume for each
tone which can be
speaker.
output from the
speakers so you can
adjust the volume for
each speaker.
Front Lch
Center
Subwoofer
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Default
Delay Time
Distance
This is a parameter for
optimizing the timing
at which the sound
Front
outputs from the
speakers according to
Center
the distance from the
listening position.
Surround
Surround Back
Default
*)Settings with (*) are the default.
• For "Speaker Size" setting, the settings of each speaker size may be adjusted automatically corresponding to each
setting. (e.g. If "Front" is set to "Small", you cannot set "Center", "Surround", and "Surround Back" to "Large".)
• For "Delay Time", the difference between the value of the "Front", "Surround" and "Surround Back" setting cannot
exceed 15 ft (4.5m), and the difference between the value of the "Front" and "Center" setting cannot exceed 5 ft
(1.5m).
• For "Delay Time", the value of the "Center", "Surround" and "Surround Back" setting cannot exceed the value of the
"Front" setting.
• For "Delay Time", the setting of "Center", "Surround" and "Surround Back" will be changed automatically to the setting
value of the "Front". (e.g. If the "Front" is set to 60ft (18m), the setting of "Center", "Surround" and "Surround Back" will
be changed to 60ft (18m) as well.)
EN
FUNCTION SETUP
Setting items
Off*
Manual
Auto
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
Feet*
Meters
0ft to 60ft (12ft*)
(0 m to 18 m (3.6 m*))
0ft to 60ft (12ft*)
(0 m to 18 m (3.6 m*))
0ft to 60ft (10ft*)
(0 m to 18 m (3.0 m*))
0ft to 60ft (10ft*)
(0 m to 18 m (3.0 m*))
Options
Select "Off" to deactivate "Test Tone".
Select "Manual", then press [ENTER] to
manually set the volume for the desired
speaker.
Select "Auto", then press [ENTER] to
automatically output the test tone from each
speaker.
If you have selected "Manual" in "Test Tone",
select the desired speaker to set and adjust
the volume for the selected speaker.
If you select "Auto" in "Test Tone", test tone
will automatically be output in order. Adjust
the volume of the speaker that outputs the
test tone.
Select "Default", then press [ENTER] to reset
"Channel Level" setting to the default.
Set the desired measure system. This measure
system will be used for "Delay Time" setting.
Press [ENTER] to switch the settings.
Select the distance from the listening position
to the speaker to get the ideal delay time.
Select "Default", then press [ENTER] to reset
"Delay Time" setting to the default.
Descriptions
39