Operation; Maintenance; Maintenance Table - THERMOBILE IMA Serie Manual Del Usuario

Ocultar thumbs Ver también para IMA Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
ENGLISH
Set the rotary switch (A) to the "3" position for
the continuous mode. The fan starts directly.
Caution
Do not switch the heater to one of the
heating positions when the fuel hose is
not connected, nor when the connected
fuel tank is empty.
3.
Set the room thermostat, if applicable.
Power up for ventilating:
1.
Set the rotary switch (A) to the "1" position
(Fig. 7). The fan starts blowing.
4

OPERATION

4.1
During operation
Hot
Do not touch the flue with rain cover, nor
the air outlet! The flue with rain cover
and the air outlet become hot during
operation!
5

MAINTENANCE

5.1

Maintenance table

Record the maintenance in the table at the back
of this book after each winter season.
Description
Check the pump for leakage, corrosion and filthiness.
Check the pump, fans, ignition, photocell, burner, electrical installation and heat
exchanger for general condition.
Check the fuel line for obstruction, corrosion and leakage.
Check the fan of the burner for corrosion and filthiness.
Check the fan for corrosion and filthiness.
Clean the filters of the pump, magnetic valve.
Check the photocell for damage. Make sure the photocell is free from dust and
sediment.
Check the adjustment of the electrodes.
Check the nozzle for dust, etc.
Clean the fuel filter with white spirit.
Clean the heat exchanger.
Clean the inlet and outlet.
Check the V-belts.
IMA
IMA
4.2
Power down for heating:
1.
2.
Power down for ventilating:
1.
2.
/i
40.019.003 - rev 09 - 2018
40.019.003 - rev. 06 - 2011
Power down
Set the rotary switch (A) to the "0" position
(Fig. 7). The magnetic valve closes to stop
the fuel supply.
Caution
After you switch off the heater, the fan
still rotates. The fan cools the heater to
avoid damage caused by overheating.
The fan stops automatically.
Do not remove the plug from the socket
until the fan fully stops!
Disconnect the electric power.
Set the rotary switch (A) to the "0" position
(Fig. 7).
Disconnect the electric power.
Period
Yearly
User
Dealer
User
User
User
Dealer
User
User
User
User
User
User
English
Biennial
Dealer
19
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ima 61Ima 111Ima 150Ima 200

Tabla de contenido