Publicidad
si el entorno del polo negativo de oro no tiene medio básico.
El medidor no imprime los datos.
Compruebe que el medidor funciona con normalidad, que el cable hacia la impresora
esté bien conectado y que la impresora funcione correctamente.
El medidor no se comunica correctamente.
Compruebe si el medidor funciona correctamente, si la configuración del software de
recogida de datos es correcta y si el cable RS-232 está conectado bien.
Otros.
Si todas las opciones anteriores para restaurar el trabajo normal fallan, por favor pón-
ganse en contacto con el servicio técnico de Nahita.
APÉNDICE
Temperatura
CS
ΔCS
ºC
mg/l
mg/l
0.0
14.46
0.0925
1.0
14.22
0.0890
2.0
13.82
0.0857
3.0
13.44
0.0827
4.0
13.09
0.0798
5.0
12.74
0.0771
6.0
12.42
0.0745
7.0
12.11
0.0720
8.0
11.81
0.0697
9.0
11.53
0.0675
10.0
11.26
0.0653
11.0
11.01
0.0633
12.0
10.77
0.0614
13.0
10.53
0.0595
14.0
10.30
0.0577
15.0
10.08
0.0559
16.0
9.86
0.0543
17.0
9.66
0.0527
18.0
9.46
0.0511
19.0
9.27
0.0496
20.0
9.08
0.0481
I
NSTRUCCIONES SOBRE PROTECCIÓN DEL MEDIO AMBIENTE
No deposite el equipo en la basura ordinaria cuando haya terminado su ciclo de vida; llé-
velo a un punto de recogida para el reciclaje de aparatos eléctricos y electrónicos, siguiendo la
reglamentación general y local vigente. No contiene elementos peligrosos o tóxicos para el ser
humano, pero una eliminación no adecuada perjudicaría el medio ambiente.Los materiales
son reciclables tal como se indica en la marcación. Al reciclar materiales o reutilizando los
equipos usados, está Ud. haciendo una contribución importante a la protección del medio
ambiente. Por favor póngase en contacto con la administración de su comunidad para que le asesoren sobre los
puntos de recogida locales.
Manual de instrucciones 50912080
CASTELLANO
Temperatura
CS
ΔCS
ºC
mg/l
mg/l
21.0
8.90
0.0467
22.0
8.73
0.0453
23.0
8.57
0.0440
24.0
8.41
0.0427
25.0
8.25
0.0415
26.0
8.11
0.0404
27.0
7.96
0.0393
28.0
7.82
0.0382
29.0
7.69
0.0372
30.0
7.56
0.0302
31.0
7.43
32.0
7.30
33.0
7.18
34.0
7.07
35.0
6.95
36.0
6.84
37.0
6.73
38.0
6.63
39.0
6.53
40.0
6.41
Pág. 15
Revisión 1 Octubre 2014
Thank you for choosing this equipment. We sincerely wish that you enjoy your dissol-
ved oxygen analyzer Nahita model 912/8. We highly recommend looking after this equip-
ment according to what is stated in this manual.
Nahita develops its products according to the CE marking regulations as well as
emphasizing the ergonomics and security for its user.
The correct using of the equipment and its good quality will permit you to enjoy this
equipment for years.
The improper use of the equipment can cause accidents and electric discharges, circuit
breakers, fires, damages, etc. Please read the point of Maintenance, where we expose the
security notes
TO GET THE BEST RESULTS AND A HIGHER DURATION OF THE EQUIP-
MENT IT IS ADVISABLE TO READ THOROUGHLY THIS MANUAL BEFORE
OPERATING WITH THE EQUIPMENT.
Please bear in mind the following:
This manual is inseparable from the portable dissolved oxygen analyzer Nahita model
912/8, so it should be available for all the users of this equipment.
Follow all required applicable laws about safety and health (electrical security devices,
inflammable, toxic and/or pathological products, etc.).
You should carefully handle the dissolved oxygen analyzer avoiding sudden move-
ments, knocks, free fall of heavy / sharp objects on it. Avoid spilling liquids inside the
equipment.
Never dismantle the different pieces of the dissolved oxygen analyzer to repair it your-
self, since it could produce a defective use of the whole equipment and a loss of the pro-
duct warranty, as well as injuries on people that handle the dissolved oxygen analyzer.
If you have any doubt about setting up, installation or functioning do not hesitate in
contacting your wholesaler. You can also tell us any doubts or suggestions you have by
contacting Nahita Technical Assistance Department by email to asistencia@auxilab.es.
This equipment is protected under the Warranties and consumer goods regulation
(10/2003).
Overhaul is not covered by the dissolved oxygen analyzer warranty.
Operations made by non-qualified staff will automatically produce a loss of the e dis-
solved oxygen analyzer warranty.
Neither fuses (1A) nor accessories (including their loss), are covered by the product's
warranty. The warranty neither covers piece's deterioration due to the course of time.
Please make sure you keep the invoice, either for having the right to claim or asking for
warranty coverage. In case you have to send the equipment to Nahita Technical Assistance
Department you should enclose the original invoice or a copy as guarantee.
Manufacturer reserves the right to modify or improve the manual or equipment.
Instruction manual 50912080
ENGLISH
Pag. 16
Version 1 October 2014
Publicidad
