Publicidad
At this time, the correspondent data is displayed on the screen, the number of the pre-
sent data is displayed on the position of the vice displaying.
Press "▲" or "▼" button to turn page and search stored data.
Press "ENTER" button, view function has finished. The meter will exit from "VIEW"
mode and return to selection mode.
Before pressing "ENTER" button in the view mode, please press "MODE/MEAS" but-
ton to cancel this mode and return to measurement mode directly.
Note: If there is no data saved in the storages, the meter will display "--" on the posi-
tion of vice displaying.
5. Power supply management
The meter is regarded as portable instrument with 4 AA alkaline batteries in it. The
meter has battery management function in order to reduce the battery consumption and
be easy for the users to operate.
The meter has low voltage indication function. When the batteries are lack of energy, the
sign of low voltage (1) will be displayed on LCD, which reminds you to change the batte-
ries.
Note: Before changing the batteries, turn off the meter.
6. Communication function
This meter is equipped with jack socket (8) it can be connected with computer through
RS-232 wire (14) and with a printer through TP-16 wire (16) supplied.
Before communicating, please connect the computer to the meter with RS-232 commu-
nicating connecting line, turn on the computer and operate the data collecting software.
The meter will collect measuring data and the data will be displayed in it and on the com-
puter.
Note: Operating software, please refer to data collecting software menu of our com-
pany.
Security
The dissolved oxygen analyzer must be used by previously qualified staff that knows
how the equipment works thanks to the user manual.
Follow all required applicable laws about safety and health (electrical security devices,
inflammable, toxic and/or pathological products, etc.).
Do not place the dissolved oxygen analyzer near any warm supply (burners, blo-
wlamps, etc), nor expose it directly to the sun. Avoid vibrations, dust and dry environ-
ments.
During its functioning dangerous materials such as flammable or pathological substan-
ces must be out of the safety area.
Instruction manual 50912080
ENGLISH
Pag. 27
Version 1 October 2014
2. DESCRIPCIÓN
Construcción del medidor
El medidor está compuesto por un sistema con un microprocesador que controla sus
funciones y un sistema de electrodo con un electrodo polarográfico. El medidor mide el
valor de OD y temperatura simultáneamente
Pantalla
1. Signo de batería baja
2. Valor de medida
3. Unidad del valor de medida
4. Valor de temperatura de medida
5. Numero de medida
6. Modo de trabajo
Panel trasero del medidor
Hay tres tomas en el panel trasero para
conectar:
1. Conexión del electrodo
2. Conexión para sensor temperatura
3. Conexión clavija jack ( para cables RS-232
y TP-16)
Manual de instrucciones 50912080
CASTELLANO
1
3
2
Pág. 4
Revisión 1 Octubre 2014
Publicidad
