Technical Specification - Velleman CAMCOLBUL17 Manual Del Usuario

4. Features
• waterproof
• B/W night vision (IR LED)
• IR night vision switches on automatically with insufficient ambient light
(switches to B/W image)
• IR night vision switches off automatically with sufficient ambient light
5. Overview
Refer to the illustration on page 2 of this manual
A IR night LEDs
B camera
C light sensor
D mounting bracket
6. Installation
• Choose the location for the camera, keeping following guidelines in mind:
• Do not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
• Avoid mounting the camera near high electro-magnetic fields.
• Do not aim the camera at the sun or other extremely bright objects.
• Mount the mounting bracket [D] on a wall or ceiling with the 3 included
screws.
• Screw the camera on the bracket with the camera connection screw [F].
• Point the camera towards the field of interest and secure it by turning the
butterfly nut [E]. Note that the light sensor [C] must be at the bottom
side. If this is not the case, remove the sunshield by releasing the hex
head screw [H] with the included Allen wrench and use that mounting hole
to mount the camera on the mounting bracket.
• Connect the (yellow) video connector [1] to a monitor (not incl.).
• Connect the (red) power connector [2] to a 12VDC power supply (not
incl.).
7.

Technical Specification

IP rating
scanning system
pick-up element
image size
picture element
total
effective
02 (09/12/2009)
CAMCOLBUL17
IP68
PAL
®
Sony SUPER HAD™
1/3" (±4.8 x 3.6mm)
537(H) x 597(V) pixels
500(H) x 582(V) pixels
4
E butterfly nut
F camera connection screw
G sunshield
H sunshield fixation screw
ultra-high sensitivity CCD sensor
rev. 01
®
Velleman