Sears Kenmore 110.2022 410 Serie Manual De Uso página 5

RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briefly (short hum) to move the basket
while filling.
SPiN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LiD LOCKED
To allow for proper load sensing and
spinning, the lid will lock and the Lid
Locked light will turn on. This light
indicates that the lid is locked and
cannot be opened.
If you need to open the lid, press START/
Pause/Unlock Lid. The lid will unlock once
START
PAUSE
UNLOCK LID
CANCEL
HOLD3 SEC
the washer movement has stopped. This may
take several minutes if the load was spinning at
high speed. Press START/Pause/Unlock Lid again
to resume the cycle. Avoid opening the lid during
sensing. The sensing process will start over when
the washer is restarted.