Scanning Tracks (Scan); Repeating Individual Tracks Or Whole Directories (Repeat); Interrupting Playback (Pause) - Blaupunkt Kingston MP47 Instrucciones De Manejo

Scanning tracks (SCAN)

You can scan (briefl y play) all the tracks on
the MP3 data carrier.
u Press the MENU/OK button ; for
longer than two seconds.
The next track will then be scanned. "SCAN"
and the current track name are intermit-
tently shown on the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
u
Briefl y press the MENU/OK button
;.
The currently scanned track will then con-
tinue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
To play the current track repeatedly,
u press the 4 RPT button 8 once or
several times until "RPT TRACK" is dis-
played.
The display shows the RPT symbol.
To repeat the whole directory,
u press the 4 RPT button 8 once or sev-
eral times until "RPT DIR" is displayed.
The display shows the RPT symbol.
Cancelling Repeat
To stop the current track or current direc-
tory from being repeated,
u press the 4 RPT button 8 once or sev-
eral times until "RPT OFF" is displayed.
The RPT symbol disappears from the dis-
play.

Interrupting playback (PAUSE)

u
Press the button 5
"PAUSE" appears on the display.
Cancelling pause
u
During the pause, press the button
8.
5
Playback is continued.
MP3/WMA mode
8.
23