Radio Operation; Switching To Radio Mode; Selecting Station; Scanning - Blaupunkt MADRID 170 BT Manual De Uso

OPERATION

RADIO OPERATION

SWITCHING TO RADIO MODE


Press SRC button (4) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE RADIO BAND

At radio mode, press BAND button (3)
to select the desired band.
The reception band will change in
following order:
→FM1→ FM2→ FM3 → MW1(AM1)→ MW2(AM2)

SELECTING STATION


Press button (12) or
(8) shortly to activate automatic seek
function. It will search up/down a station
automatically. Press for 2 seconds until
"MANUAL" appears on the display, the
manual tuning mode is selected. In this
mode you can turn up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for 5 seconds, it will return to
seek tuning mode and "AUTO" appears
on the display.
AUTOMATIC STORING & PROGRAM


SCANNING

52. Automatic storing
53. Press TS button (2) for 2 seconds the
radio searches
frequency and
strength until one cycle search is
finished. And then some strong stations
are stored into the corresponding
button
from the 87.5MHz
checks the signal
preset
number button of the FM3 band.
54. In the first cycle it will in LOCAL mode to
receive the stronger station. If it is less
than 6 pcs station it will searching
nd
stations in 2
mode.
55. Program scanning
Press TS button (2) shortly to scan
preset station. The radio is holding at
that preset number for 5 seconds with
release mute.
MANUALLY STORE STATION &

RECALL PRESET STATION
To received a station, Press one of the
preset button (1~6) for 2 seconds. The
current station is stored into the
number button. Shortly press the preset
button (1~6) to directly listen the
station that saved in the corresponding
preset button.

RDS (RADIO DATA SYSTEM) OPERATION

 Setting RDS mode
In AF item of system menu. Rotating
audio knob to switch on or off the AF
function.
Whenever AF is on, symbol "AF"
appears on the display.
Program name is displayed on receiving
a RDS station.
"AF" starts blinking if the broadcasting
signal getting worse.
"ALARM" will be displayed when an
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control
is set at minimum.
187
cycle in LOCAL OFF
E
N
G
L
I
S
H