Scope Of Delivery; Placing The Device In Operation; Theft Protection; Switching On/Off - Blaupunkt Philadelphia 835 Manual De Instrucciones

Scope of delivery | Startup

Scope of delivery

The scope of delivery includes:
• Philadelphia 835
• Remote control (incl. battery)
• TMC Tuner (not for 1 011 303 911)
• MicroSD card with navigation data in the MicroSD
card slot (only for devices with navigation)
• GPS antenna
• External Bluetooth microphone
• Getting started
• Small parts set
• Installation material
• Connecting cable

Placing the device in operation

Caution!
Transport securing screws
Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de-
vice.
Note:
The Philadelphia 835 features an integrated CAN
interface that allows it to be integrated into the in-
ternal vehicle data communication for selected ve-
hicles. This integration automatically switches the
display of the Philadelphia 835 (if the equipment
features in the vehicle are prepared for it) to parking
mode when parking. When operating the air-condi-
tioning system, the settings are shown on the display
of the Philadelphia 835. The audio/video sources can
be operated conveniently and safely from the steer-
ing wheel-mounted controls.
28
All manuals and user guides at all-guides.com

Theft protection

This car sound system is protected against theft with a
four-digit code number (code number is factory-set to
0000).
If the code query is activated, the code number must
be entered after every interruption of the power supply
from the vehicle battery.
Entering the code number after a voltage
interruption
If the code number is required, a keypad for entering the
code number is displayed.
u Enter the code number via the keypad.
u Press the [

Switching on/off

Switching on/off with the rotary/pushbutton
u For switch-on, press the left rotary/pushbutton
u For switch-off , hold the left rotary/pushbutton
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched off with the left rotary/push-
button
Note:
In the General submenu of the settings menu, you
can activate/deactivate the code query and change
the code number.
] button to confi rm the entry.
The device is switched on.
Note:
If you entered an incorrect code number, the display
briefl y shows Security code incorrect!. Afterwards,
you can repeat the code entry.
pressed for more than 2 seconds.
5
, it is switched on or off with the ignition.
5
.
5