General Warnings And Instructions - Corghi HD 1300 Manual De Uso

GENERAL WARNINGS AND INSTRUCTIONS

Take care to avoid any injuries. Carefully read, understand and observe the warn-
ings and instructions provided in this manual. This manual is an integral part of the
product. Store it together with the machine in a safe place for future reference.
1. If the maintenance procedures described
in this manual are not executed correctly,
or if other instructions in the manual are
not observed, accidents could occur. This
manual makes continuous reference to the
possibility that accidents can occur. Any
accident could cause serious or fatal injuries
to the operator or people nearby, or cause
material damage.
2. Never attempt to mount tyres and rims that
do not correspond. It is very dangerous.
Tyres and rims that do not correspond could
explode, causing accidents.
3. Only the bead insertion operation is permitted on the tyre changer, without
exceeding a pressure of 0.5 bar.
4. To inflate the tyre, remove it from the tyre changer and place it in the inflation
cage
5. Do not use inflation devices (e.g. pistols) connected to the tyre changer using
external power supply to the machine.
6. Never bring your head or other body parts close to a tyre during bead insertion.
This machine is not a safety device against the possible explosion risk of tyres,
air chambers or rims.
7. Maintain a suitable distance from the tyre changer during bead insertion, do
not approach it.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly with the rim dimensions (printed inside the rim) or if the rim or the tyre
are defective or damaged.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep other people at a distance
HD 1300 / HD 1300 A Operator Manual
CAUTION!
DANGER
EN
69