Motorola RAZR V3m Guia Del Usuario página 13

Master Volume setting, regardless of which ring
style you have set. The phone changes back
to your selected ring style when you
disconnect the charger.
To charge using the charger:
1 Insert the
charger into the
USB connector
on your phone as
shown.
2 Plug the other
end of the
charger into the appropriate electrical
outlet.
The battery indicator N flashes while
your phone is charging.
3 When your phone is turned on with the
charger attached, the charge complete
message will flash on the display for
two seconds and then the battery meter
symbol will stop flashing when your
phone is fully charged. If your phone is
turned off with the charger attached, the
charge complete message will stay on
the display when your phone is fully
charged. Remove the charger.
Tip: You can safely leave the charger
connected to the phone after charging is
complete. This will not damage the battery.
When you charge the battery, the battery level
indicator in the upper right corner of the
display shows charging progress. At least one
segment of the battery level indicator must be
visible to ensure full phone functionality while
charging.
To charge from your PC, connect a cable
from your phone's mini-USB port to a high-
power USB port on a computer (not a low-
power one such as the USB port on your
keyboard or bus-powered USB hub). Typically,
essentials 11