Troubleshooting - SELFSAT SNIPE DRIVE DiSEqC 1.1 Manual De Usuario

There are a number of common issues that can affect the signal reception quality or the
operation of the SNIPE DRIVE. The following sections address these issues and potential
solutions.
A. No function when you power on the Controller
i. Check again all the cable connections have been made correctly.
Connection between the power and controller
Connection between the controller and the antenna.
ii. Check if the power input cable has been damaged.
iii. Check the battery polarities (+/-).
B. Fail to search the selected satellite
i. Satellite signals can be blocked or degraded by buildings, trees.
Make sure there are no obstructions in southward direction.
Upgrade your SNIPE DRIVE to the latest version.
ii.
C. Mechanical problems
i. If the antenna makes a noise while remaining static.
Try to power OFF/ON again. If problem persists, please contact your local distributor for assistance.
D. Other issues
i. If the system has been improperly wired, it will not operate properly. Contact your local
distributor for assistance of cable damage.

5. Troubleshooting

9