Operating Instruction; Connection Diagram; Functional Description - SELFSAT SNIPE DRIVE DiSEqC 1.1 Manual De Usuario

3-1. Connection diagram

RECEIVER
TV

3-2. Functional description

A. In-Motion mode (Default)
a. When the all cable connections are completed, turn on the power switch
b. All satellites LEDs light on while booting the system (15~30 seconds)
c. Default (ASTRA2) or the last status satellite is automatically selected
d. Tracking LED light on since the unit searches the satellite
e. When Lock LED becomes solid this means the satellite is found
f. If the other satellite is desired, move to the correct satellite and press SET to
confirm the new satellite
For example :

3. Operating Instruction

Mode LED is OFF if In-motion mode is selected
CONTROLLER
Power input cable
MAIN UNIT
5