Telephone Functions - Blaupunkt Concept Pro II Detroit 2024 Instrucciones De Manejo

Notes:
• If no connection can be established, the
display briefl y shows "CONNECT FAILED".
• After switch-on, the car sound system
automatically attempts to reconnect the
device connected last. If the connection
attempt fails, the display briefl y shows
"DISCONNECTED". If necessary, attempt
to re-establish the connection from the
streaming device.
• If the device connected last cannot be
located after switching on the car sound
system, the car sound system attempts to
connect one of the other paired devices. If
none of the devices is located, the display
briefl y shows "NO DEVICE".

Telephone functions

Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "IN CALL" and the number of the caller. The
current audio source is muted and a ring tone is
played via the loudspeakers of the car sound sys-
tem.
Note:
If the number of the caller is not being trans-
mitted, the display shows "IN CALL" instead
of the number. If the number of the caller is
stored together with a name in the car sound
system, the name of the entry and the num-
ber are displayed (see the section "Storing a
phone number in the car sound system" in
this chapter).
u Press the
button
"CALL" and the duration of the ongoing call
are displayed.
u Press the
button
to end the current call.
The display shows "END CALL".
@
to answer the call.
?
to reject the call or
Notes:
• During the call, you can adjust the volume
with the volume control
device with a short press of the On/Off
2
button .
• You can preset the hands-free volume
in the user menu (see the chapter "User
settings", section "Making settings in the
" VOLUME" menu", menu item "TEL VOL").
Making a call
u In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
u Press the
button
menu.
You can now enter a phone number with up
to 20 digits:
u Turn the volume control
for the respective position.
u Press the
or button
or previous position.
Notes:
• You can also reach the next position by
pressing the ON/Off button
• While entering the phone number, you
cannot change the volume or mute the car
sound system.
u Press the
button
entered.
"CALLING" and the dialed number are alter-
nately shown on the display.
As soon as your calling party answers the call,
the display shows "CALL" and the time of the
current phone call.
Upon ending the call, the display briefl y
shows "END CALL".
Making a call with voice dial
Note:
This function is only available if the connected
cell phone supports voice dial.
u In the Bluetooth® menu, select the "VOICE
DIAL" menu item.
Bluetooth®
4
or mute the
7
to open the entry
4
to select a digit
7
to reach the next
2
.
@
to call the number
39