Gaggia GE-GD ONE Instrucciones De Uso página 33

ENgLIsh
10 - TROUBLE SHOOTING
PROBLEM
Machine switch off
No water in boiler
No unit delivery
Steam fails to come out of the
nozzle
Too much water in the boiler
Wet coffee dregs
Coffee dispensing too slow
Coffee dispensing too fast
11 - MACHINE DISMANTLING
For a correct disposal of the machine, please follow the instructions
contained on the last pages of the manual.
CAUSE
1. Machine switch off
2. Cable not properly connected
1. Water tank empty
2. Tank plates not inserted
3. Motor driven pump not in operation
1. motor driven pump out of order
2. unit solenoid valve out of order
3. unit switch out of order
1. too much water in boiler
2. damaged resistance
3. clogged sprayer element
4. resistance saver engaged
1. the motor driven pump remains engaged
2. perforated exchanger
3. automatic charge solenoid valve blocked
1. Grinding regulated too fine
2. Unit still cold
3. Solenoid valve fails to discharge
1. grinding element set too fine
2. dirty filter-holder
3. clogged unit
4. Solenoid valve partially clogged
1. grinder is regulated too large
REMEDY
1. position the machine switch to
position
2. Connect power cable
1. Fill tank
2. Insert plates into tank
3. contact specialized personnel
1. contact specialized personnel
2. contact specialized personnel
3. contact specialized personnel
1. see specific problem
2. contact specialized personnel
3. clean the sprayer element
4. reinsert the resistance
1. contact specialized personnel
2. contact specialized personnel
3. contact specialized personnel
1. Adjust grinding value
2. wait for the machine to reach the correct tem-
perature
3. contact specialized personnel
1. Adjust the grinder
2. replace the filter and undertake more frequent
filter-holder cleaning
3. contact specialized personnel
4. contact specialized personnel
1. regulate the grinding
33