Setting Up The Appliance - Proxy AGF400NTENSAI Manual De Instrucciones

ATTENTION
Read your manual carefully since it contains instructions which will
ensure safe installation, use and maintenance of your appliance.
Your cooler is built to International safety standards (2006/95/CE).
It also meets the standards on the prevention and elimination of radio
interference (2004/108/CE).
- The manufacturer reserves the right to modify the characteristics of the
models without prior notice.
- Some models may not have all the accessories indicated.
1. This appliance is designed to be used indoors and under no
circumstances should it be installed outside, even if protected by a roof.
Leaving the appliance exposed to the rain and whether is exceedingly
dangerous.
2. The appliance should be used only by adults and exclusively for
storing foodstuffs in compliance with the instructions provided in this
manual. Under no circumstances should children be allowed to operate,
or tamper with, this product.
3. Do not attempt to operate or handle this appliance when barefoot, or
with wet hands or feet.
4. It is highly recommended that you do not operate this appliance by
connecting it to the power supply with extensions or multiple socket
plugs. If the freezer has been installed between two cabinets, make sure
that the supply cord is not dangerously crimped or trapped beneath a
heavy object.
5. Never pull the cable or the appliance to remove the plug from the
socket; this is exceedingly dangerous.
To ensure that the appliance operates properly and to reduce
energy consumption, it is important that the appliance is installed
correctly.
Ventilation
The compressor and condenser generate heat and, therefore, need to be
ventilated properly. Rooms with no ventilation are not suited for
installation of the appliance. Therefore, it should be installed in a room
with an opening (window or French window) that provide the appropriate
amount of air re-circulation. It is also important to install it in a free
humidity room.
During installation, make sure not to cover or obstruct the grates that
allow for proper ventilation of the appliance. For proper ventilation of the
appliance, leave a space of at least 10 cm between the sides of the
appliance and any adjacent cabinets/walls.
Away from Heat
Avoid positioning the appliance in a place where it is directly exposed to
sunlight or near an oven, cook top or the like.
A Temperature Adjustment Knob
B Sliding Lid
Before starting the appliance, follow the installation instructions (see
"Installation").
Before connecting the appliance, clean the compartments and
accessories with lukewarm water and bicarbonate.
Using the cooler to its full potential
The temperature inside the cooler automatically adjusts itself according
to the position of the thermostat knob.
Use average temperature settings to ensure optimum performance and
to save energy.
Safety
Installation
The Appliance

Setting Up The Appliance

Efficient Usage of The Appliance
6. Do not touch the internal cooling elements, especially if your hands are
wet, since you could burn or hurt yourself.
7. Before doing any cleaning, disconnect the appliance from the
electricity (by pulling out the plug or turning off the general switch in your
home).
8. Before disposing of your old appliance, remember to break or remove
the lock as a safety measure to protect children who might lock
themselves inside the appliance when playing. In addition, if the
appliance is a new one with a lock, keep the key out of the reach of small
children.
9. If your appliance is not operating properly, read the chapter entitled,
"Trouble Shooting", which might help you resolve the problem. Do not
attempt to repair the appliance by tampering with the internal
components.
10. If the power supply cord must be replaced, please note that in some
cases, the connections are made using special terminals and in others a
special tool must be used to access the connections. This operation
should only be performed by an authorized agent.
11. Do not use electric appliances inside the cooler, if these are not those
recommended by the manufacturer.
12. At the end of the functional life of your appliance -containing
cyclopentane gas in the insulation foam and perhaps R600a gas
(isobutane) in the refrigeration circuit - it should be made safe before
being sent to the dump. For this operation, please contact your dealer or
the Local Organisation in charge of waste disposal.
Electrical and Earth Connection
The appliance should not be turned on right after transportation. Two
hours is the advised time so that the oil from the motor-compressor gets
back to its original position.
Before proceeding with the electrical connection, make sure that the
voltage indicated on the rating plate, located in the back of the appliance,
corresponds to the mains voltage in your home and that the socket is
fitted with a standard earth wire in accordance with safety standards. If
the socket is not fitted with an earth wire, the manufacturer will not be
held liability for any damages and or injuries arising out of the use of the
appliance. Do not use multiple sockets or adapters.
Position the appliance in such a way that you can access the socket
where it is plugged in.
Insufficient power
The electrical socket must be able to handle the maximum power load of
the appliance, which is indicated on the rating plate located inside the
appliance.
C Thermometer
D Defrost water discharge hole (not present in all models)
Insert the plug into the socket.
NOTICE
Use average temperature settings to ensure optimum performance
and to save energy.
Place only cold or lukewarm foods in the compartment, not hot foods.
Do not store liquids in open containers. They will increase humidity in the
cooler and cause condensation to form.
Avoid opening the cooler lid when not necessary.
EN
2