Tabla de contenido
Publicidad
18 GAUGE 1-1/4 INCH BRAD NAILER
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept no
liability for damage or accidents
which arise due to non-observance
of these instructions and the safety
information herein.
SPECIFICATIONS
Operation Pressure: 60-100PSI
MAXIMUM PRESSURE： 100PSI
Magazine Capacity: 100
Fastener Length: 3/8 - 1-1/4 inch
Uses all types of 18ga. brad
AIR INLET: 1/4 inch NPT
CAUTION:
FOR YOUR OWN SAFETY,
READ INSTRUCTION MANUAL
COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS BRAD
NAILER.
Any failures made in following
the safety regulations and
instructions may result in an
electric shock, fire, and/or
serious injury.
Model: XAGD32
IMPORTANT SAFETY
INSTRUCTIONS
INSTRUCTONS PERTAINING
TO A RISK OF FIRE,
ELECTRIC SHOCK, OR
INJURY TO PRESONS.
WARNING:
When using tools, basic
precautions should always be
followed, including the following:
GENERAL
To reduce the risks of electric
nail
shock, fire, and injury to
persons, read all the
instructions before using the
tool.
WORK AREA
1) Keep the work area clean
and well lighted. Cluttered
benches and dark areas
increase the risks of electric
shock, fire, and injury to
persons.
2) Do not operate the tool in
explosive atmospheres, such
as in the presence of
flammable liquids, gases, or
dust. The tool is able to create
sparks resulting in the ignition of
the dust or fumes.
8807552
07/10
Publicidad
Tabla de contenido
