Circuit Breaker - Ryobi GD125 Manual Del Operador

KNOW YOUR GARAGE DOOR OPENER
See Figures 3 - 5.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AC RECEPTACLE
The garage door opener has a 120 Volt AC, GFCI protected
receptacle with a rating of 10 Amps. It can be used for
operating AC garage door accessories as well as appropriate
appliances, electrical lighting, and tools.
ACCESSORY PORTS
Your garage door opener has four ports for operating DC
garage door accessories.
ANTENNAS
The Wi-Fi and RF antennas allow the garage door opener
to communicate with the smartphone app, car remotes,
and keypads.
AUTOMATIC REVERSAL SYSTEM
When a closing garage door contacts an object that is
1-1/2 in. above the garage floor, the automatic reversal
system will stop and raise the door to the fully open position.
BELT DRIVE SYSTEM
This product is equipped with a belt drive system that is
quieter than traditional chain-drive models.
CAR REMOTES
Convenient car remotes allow you to activate the garage
door opener from a distance of up to 300 ft. The remotes
are equipped with a visor clip, so you can store them on
your car's sun visor.

CIRCUIT BREAKER

The circuit breaker is provided to protect the AC accessories
against electrical overload. The circuit breaker may be reset
by pressing the circuit breaker reset button.
EMERGENCY RELEASE ROPE
In the case of an emergency or entrapment, pulling the
emergency release rope will allow you to manually raise a
closed garage door.
FEATURES
HomeLink
Features on your garage door opener can be controlled by
cars and homes equipped with HomeLink
HomeLink
®
Gentex Corporation.
INDOOR KEYPAD
The indoor keypad is installed on the interior of the garage
and can be used to open and close the garage door, activate
the accessory ports, and turn the LED lights on and off.
LED LIGHTS
LED lights are located beneath the light cover and illuminate
whenever the motor is running or the LIGHT (
the indoor keypad is pressed. To turn the LED lights off,
press the LIGHT (
NOTE: By default, the LED lights will illuminate for three
minutes after the LIGHT (
power head starts opening or closing the garage door. The
time can be adjusted in one minute increments, between
one and ten minutes, using the RYOBI Garage Door Opener
Accessory System App.
RAIL SYSTEM
The ergonomic rail design makes assembly and installation
quick and easy.
SAFETY SENSORS
Your garage door opener comes with two sensors that cast
an invisible light beam across the opening of your garage.
If an object crosses the path of the beam while the garage
door is closing, the door will automatically stop and reverse
to the fully open position.
SMARTPHONE COMPATIBILITY
The garage door opener can be operated remotely with a
smartphone using the RYOBI Garage Door Opener Accessory
System App. For more information, visit ryobitools.com or
download the app from the App Store or Google Play Store.
VACATION MODE
To enter and exit vacation mode, press and hold the LOCK
( ) button on the indoor keypad for one second. When in
vacation mode, the garage door opener can only be controlled
by the indoor keypad and smartphone app.
11 - English
COMPATIBILITY
®
and the HomeLink house icon are registered trademarks of
®
) button.
) button is pressed or after the
control systems.
®
) button on