Festool CMS-OF Manual De Instrucciones página 12

Module mounting CMS-OF
1 Symbols
Warning of general danger
Risk of electric shock
Wear a dust mask!
Read the operating instructions/notes
Advice or tip

2 Technical data
Bench dimensions
Bench height with foldaway legs
Bench height without foldaway legs
Max. routing tool diameter
Max. routing tool height
Module mounting weight
Workpiece dimension, max. L x W x H
650 mm x 160 mm x 65 mm
3 Scope of delivery
[1-1] M o d u le m o u n t i n g C M S - O F 1 0 1 0 /
1400/2200 with height adjustment
[1-2] Router stop
[1-3] Press-down fi xture
[1-4] Centring and reducing rings
[1-5] Guide rail
[1-6] Curved guard
[1-7] Protective cover for OF 2200
[1-8] Crank handle for height adjustment
[1-9] Clamping supports
[1-10] Adjustment plate
The specifi ed illustrations are at the beginning of
this operating manual.
4 Intended use
The module mounting CMS-OF was designed for
Festool routers OF 1010, OF 1400 and OF 2200,
but not for router OF 2000. The Festool routers
listed above can be used for stationary applica-
tions when combined with the module mounting
and the basic unit CMS-GE.
Do not install any routers other than those listed
12
above. The user bears the responsibility for dam-
age and accidents caused by improper use.
5
5.1
working stand and the power tool to be mounted.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
585 x 400 mm
- Disconnect the plug from the power source
900 mm and/or the battery pack from the power tool
before making any adjustments or changing
316 mm
accessories. Accidental starting of the power
60 mm
tool is a cause of some accidents.
60 mm
- Properly assemble the working stand before
4.65 kg
mounting the tool. Proper assembly is impor-
tant to prevent risk of collapse.
- Securely fasten the power tool to the working
stand before use. Power tool shifting on the
working stand can cause loss of control.
- Place the working stand on a solid, fl at and
level surface. When the working stand can shift
or rock, the power tool or workpiece cannot be
steadily and safely controlled.
- Do not overload the working stand or use as
ladder or scaffolding. Overloading or standing
on the working stand causes the stand to be
"top-heavy" and likely to tip over.
5.2
- Never use cracked or deformed router bits.
- Ensure that the router bit is seated fi rmly and
that it runs perfectly.
- Select the centring ring depending on the router
and insert the reducing rings according to the
cutter diameter.
- Wear suitable protection such as ear defenders,
safety goggles, a dust mask for work which gen-
erates dust and protective gloves when working
with raw materials and changing tools.
- When processing materials that generate haz-
ardous dust (e.g. wood), connect the machine to
a suitable dust extractor.
- Make sure the router stop, extraction hood and
press-down fi xtures are adjusted correctly be-
Safety instructions
General Safety instructions
WARNING
Read all safety warnings
and all instructions provided with the
Machine-related safety instructions