Commissioning - Mettler Toledo WMF Serie Manual De Usuario

4.5 Commissioning

Follow these steps to put the WMF weigh module into operation:
1 Install the weigh module in the place of use. For details refer to the Installation Manual.
2 Add custom-specific parts.
3 Switch on the power.
4 Observe the warm-up time (at least 45 minutes after power up).
5 Perform an adjustment before starting the weighing operation.
WMF
NOTICE
Damage to the weigh module
1 Always handle the weigh module with care.
2 Do not let the weigh module fall to the ground.
Operation​ ​ 9