Velleman HAMGSM133 Manual Del Usuario página 9

Factory reset
Command: RES;pwd
Example: RES;12345
Enable SMS reception
Command: SMSxxxxxxxx:ON;pwd
Example: SMS15:ON;12345
Phone numbers on position 1 and 5 will receive an SMS when input status changes.
Other numbers are not affected.
By default all eight phone numbers receive an SMS.
Disable SMS reception
Command: SMSxxxxxxxx:OFF;pwd
Example: SMS27:OFF;12345
Phone numbers on position 2 and 7 will NOT receive an SMS when input status changes.
Other numbers are not affected.
Enable ringtone reception
Command: VOCxxxxxxxx:ON;pwd
Example: VOC15:ON;12345
Phone numbers on position 1 and 5 will receive an ringtone when input status changes.
Other numbers are not affected.
By default all eight phone numbers receive ringtones.
Disable ringtone reception
Command: VOCxxxxxxxx:OFF;pwd
Example: VOC36:OFF;12345
Phone numbers on position 3 and 6 will NOT receive an ringtone when input status
changes.
Other numbers are not affected.
Set logic alarm level to HIGH (alarm when input under tension)
Command: LIVx:A
Example: LIV2:A
Set alarm level on input 2 to high, alarm is activated when input 2 is under tension.
Default both inputs are set to level HIGH.
Set logic alarm level to LOW (alarm when input tensionless)
Command: LIVx:B
Example: LIV1:B
Set alarm level on input 1 to low, alarm is activated when input 1 loses tension.
Set logic alarm level to switching (alarm when input tension changes)
Command: LIVx:V
Example: LIV1:V
When tension changes on input 1, e.g. from low to high, the alarm is activated.
15/12/2011
(password required)
pwd = current password (default = 12345)
(password required)
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
(password required)
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
(password required)
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
(password required)
xxxxxxxx = position of the number in the list (1~8)
pwd = current password (default = 12345)
x = 1 (input 1) or 2 (input 2)
x = 1 (input 1) or 2 (input 2)
x = 1 (input 1) or 2 (input 2)
HAMGSM133
9
© Velleman nv